August 16, 2014August 16, 2014 by Michael

New Harmonic Resolution Systems HRS RXR Rack

These photos of the HRS RXR rack are from CES 2014.

They were [are] supposed to go up on the Ultimist show report – but time has been at a premium here lately.

So we’ll post them here, and hopefully later will get back and add these, along with a 1000+ other photos, to the Venetian part of CES 2014 show report on Ultimist.

The RXR is HRS’s least expensive rack. Though more modestly priced, it still has that high-performance vibration control technology that the SXR and MXR racks were so successful with. Hard to pin Mike Latvis down on what percentage of the performance of the SXR we can count on for the RXR – but that has a lot to do with its configurability.

The rack can use any one the 3 HRS platforms for its shelves. Or you can mix and match. As you can see in the photos, you can use their top of the line M3X, their somewhat more modest S1, or a basic platform that was specifically designed to work in the RXR rack.

The idea is you can get the rack and a few basic platforms. Then, when funds permit, upgrade to the better S1 and M3X platforms – thereby slowly building yourself a very high-performance rack over time.

The HRS RXR support system (equipment rack)

The underneath of the new basic platforms for the RXR. The corners there are made of the special HRS polymer similar to that which goes into their other, top-of-the-line products.