Experimenting with the current systems a little

Teck, from Singapore, played a female vocals CD in our room, and likely a few lucky other rooms as well, at RMAF, and kindly and generously sent us a copy of it:

And, uh, it is surprisingly difficult to render well. The second track, specially, the singer has lotssssssss of sssssss’s in her ssssssinging that can caussssssse ssssssibliance when played back [i.e. sharp S sounds instead of delicate, sweet s sounds]. Luckily, the completely optimized system we took to the show played everything perfect, but some of our experimental systems, that otherwise play flawlessly [more or less] have difficulty here, and truth to tell, the playback in general on this CD could be better.

I think the answer will turn out to be a combination of the fact that we are playing it LOUD [what? L-O-U-D!!! Anybody else have these strange conversations when the music is loud? That usually end in “Forget it. I’ll Tell!… You!… Later!…”. “WHAAAAT!?”], the equipment is sitting very nearly right in front of the speakers, and the bass needs adjusting because the room is so large – we got used to using an integrated, and I do not think we have used solid-state on the main towers for over a year.

So we struggle, changing power cords, cleaning the CD, changing cables etc. to try and figure out what thing[s] are responsible. Everything to avoid having to move things or put a rack between the speakers [on the other hand, Neli is happy as a clam to have Mike move things, including racks, to and fro, fro and to].


System 1


Lamm L2 linestage’s power supply


Lamm L2 linestage. Just about everything is on HRS M3 Isolation Bases.


Emm Labs CDSA CD / SACD Player.

Anyway, that is what’s happening here. The Vidar has not yet arrived so we are not burning in anything that needs to be burned in. So, we are circling the field waiting to land.


System 2


Audio Note Ongaku integrated amplifier


Audio Note DAC 4.1x Balanced


Audio Note CDT Three transport

And, yes, Teck, your other CD arrived to [Thanks SO much!]. But, uh, I accidentally left it in the Emm Labs CDSD SE which, uh, is unplugged and at the moment away from an outlet, and I need to find a power cord for it somewhere [can I use a stock $2 Belden power cord? Of Course Not :-)] and plug it back in so I can eject the CD [See, I TOLD you all that I do this ALL THE TIME. Don’t know what it is… some kind of curse because I ‘let’ Neli clean all the CDs (and records, too) or something… :-)]

We like the CDs. We are certainly playing them a lot. The soundtrack is a little like the Gladiator soundtrack… I mean, doesn’t it seem like soundtracks have their own genre -they’re not classical and they’re not pop. Cool depth of field though, and amazing drums.

Musical Chairs or Hot Potato?

Been moving things around some.

We are trying to setup things so that we have two systems we can wire with all Nordost ODIN cables [hopefully here next week], with 2 interconnects and one speaker cable [we are ignoring the Coltrane Surpreme’s bass tower speaker cables, at our own ear’s risk, of course – but our pocketbooks and wallets thank us].


Edge Signature One solid-state amps driven directly by Audio Aero Prestige, with Brinkmann Balance turntable and Lamm LP2 phono plugged in to one of the inputs on the Prestige.


Unfortunately, the limitations of the $14K Prestige’s built-in preamp [linestage] is evident, things being a little muddier than what we are looking for [especially in comparison to the pre in the $85K Audio Note Ongaku we were using before :-)]. The Prestige’s built-in pre is fine for things up to, say, $40-50K speakers, at which point the decision on whether to get an outboard preamp has to be made on a speaker by speaker basis – and the size of one’s wallet. The Kharma Mini Exquisites like a little more oomph of the extra pre, the Marten Coltrane speakers do well with either.

I’m sure the Audio Note M10 linestage on the Kegons would be great, as well as the Lamm L2 linestage on their ML2.1 amps, but then we are talking about 3 interconnects for digital instead of 2, and so no 100% ODIN setup.

Downstairs, we have the Emm Labs CDSA driving the Lamm L2 linestage into the Audio Note Kegon amplifiers. Interesting mix of brands, I know, but it sounds re-e-e-e-al good – and it allows us to swap in different amps for demos.


But, since that demo has been postponed, and in the interest of limiting this system to just 2 interconnects as well, we will setup the Emm Labs CDSA player [and/or Audio Note CDT3 transport and 4.1x Balanced DAC] connected to the Audio Note Ongaku integrated into the Kharma Mini Exquisite loudspeakers.

If we just had ONE more pair of ODIN interconnects… and another speaker cable for the bass towers on the Supremes [probably open up their bass something wonderful], … but, no, we can’t go there. That way lies madness. 🙂


A final shot of the Audio Note amps.

We hope to have an 100% Audio Note Sogon cabled system – with some of their SOTTO thrown in as well 🙂 before too long. I anticipate completely different sounds from these systems using these different cables 🙂 And we already did the 100% Jorma Design Prime system [at the RMAF show].

It will be so much fun hearing all the differences.

This is what life is all about: enjoying the differences this world has to offer, and experiencing the fruits of expert craftspeople in the pursuit of excellence.

Playing an electric guitar through an Audio Note Ongaku amplifier

Richard works at Audio Note and does many things including the website and, apparently, playing guitar through the Audio Note U.K. Ongaku integrated amplifier and Audio Note speakers.

If the video maker does not allow embedding, and there is no video above, clicking on the link below will take you take you to the video on YouTube.

The Video

Cool huh? And not a bad job playing the guitar either.